Tornado_1v1's ATC Tracking Thread - [CLOSED] @ N/A

Hello IFC!
Welcome to my ATC Tracking Thread, I will be beginning my journey towards IFATC and I will be looking towards your feedback to further improve my skills and look at areas of need.

Status: CLOSED
Airport:
Time:
Runway in use:
Area of Focus: Transition and Traffic Patterns
Notes:
Server: Training


Tags: @Andy_R

1 Like

Feedback from B-LCL

Great session overall! Some feedback below:

Good pattern entry and traffic direction on clearance for the request of runway change

When I state I’m going to full stop you don’t need to enter a pattern entry or clearance because you’ve already cleared me

Good luck with your journey to IFATC!

If you have any questions please don’t hesitate to ask me!

1 Like

Thank you, appreciate the feedback and I can see this is an area of need.

1 Like

Hiya, @Tornado_1v1! Tag me next time you open, please! :)

3 Likes

Status: OPEN
Airport: YBBN - Brisbane International
Time: 2021-11-10T05:30:00Z2021-11-10T06:15:00Z
Runway in use: 01R/L
Area of Focus: Transition and Traffic Patterns
Notes:
Server: Training


Tags: @Andy_R

Hi! Still open?

1 Like

Yes, until 2021-11-10T06:15:00Z or extended dependent on traffic.

Cool, coming as A8-RDZ.

1 Like

Feedback: A8-RDZ

[Inbound/Tower | 01R]

[05:58:43] - Transition was good at 3000ft with airport elevation at 15ft. But 2500ft would’ve been good as well.
[06:01:21] + [06:01:32] - Good pattern entry of Right downwind considering I was on the right side of the airport. Clearance was good as well with a make right traffic I was inbound.

[Local/Tower | 01R]

[06:07:50] - Good job on handling the runway change to 01L with a pattern entry of left downwind, remember there will be sometimes a conflict on upwind for 01L, so what you would need to do is give an Extend upwind, I will call your crosswind to the pilot requesting a change, once both aircraft have separation, issue a pattern entry and sequence for the pilot that requested a change then a clearance for the option with a make left or right traffic.
[06:08:08] - Good clearance again with a make left traffic as I changed runways.

[Tips from me]

For Remaining in the pattern aircraft

  • Sequence the aircraft if needed.
  • Clearance for the option.

For Inbound

  • Pattern Instruction + Sequence the aircraft if needed.
  • Clearance for the option if Touch and Go + Make xx traffic. If Landing, Cleared for Landing.

For Runway Changes

  • Extend upwind if there is a conflict parallel to the aircraft requesting the change.
  • Pattern Instruction + Sequence the aircraft if needed.
  • Clearance for the option if Touch and Go + Make xx traffic. If Landing, Cleared for Landing.

Note: Make sure to re-sequence aircraft if needed to.

For Go Around

  • Make xx traffic.
  • Pattern Instruction + Sequence the aircraft if needed.
  • Clearance for the option if Touch and Go. If Landing, Cleared for Landing.

For Transitions

  • Airport Elevation + 2500ft

Thanks for having me and great job, tag me when you open next time please! :)

1 Like