I am practicing my ATC and would like to see what you think and give me some advice thanks.
Server: Training
Airport: EDDF
Open Runways: 25R, 25C, 25L, 36
Frequencies: Ground & Tower
I´m coming
Ok
Your flight number?!
EC-ADRI lol
Hi! I was with the callsign N739EC. Below are listed a few of my observations:
-
Ground commands were good.
-
Runway changes are approved by pattern entries. Therefore, when I requested change to 25R, the appropriate command would have been “Enter right downwind runway 25R”
-
When doing Patterns, the appropriate clearance would be “cleared for the option”, which would give the aircraft clearance to either land, touch&go, stop&go or even a fly past.
-
The runway exit command was missing.
You can view more helpful tutorials in #tutorials:atc :)
Hope this was helpful!
Thank you for comment :)
Alright, that was pretty bad actually:
-
While I was taxiing I had a Cessna Citation crossing in front of me and I had to stop to not crash into it, you need to say ‘‘give way to aircraft on your left’’ or ‘‘hold position’’
-
You told me ‘‘line up and wait’’ and I waited for 1 minute on the runway until you told me ‘‘clear for takeoff’’ while there was any traffic in front of me or on the surroundings.
-
You told me to ‘‘make right traffic’’ while I was departing from rwy 25L, you should tell me to ‘‘make left traffic’’ and so I won´t cross with the inbound or outbound traffic of rwy 25C and 25R.
-
You can´t say ‘‘Roger’’ to all I tell you. While I´m in a pattern I need to report position to tower until he gives me clearance for the option. You didn´t clear me so I reported all positions and when lees than one mile had to go around as I had no clearance.
-
You did this (4) 2 times that´s why I left. Nobody can fly in the pattern with you being tower if you don´t clear them.
Hope this feedback helps you, I´ll try to come in some days and see if you have improved on something.
Adri
Thank you for comments
I will fixed my mistake
It’s open now
I am practicing my ATC and would like to see what you think and give me some advice thanks.
Server: Training
Airport: EDDF
Open Runways: 25R, 25C, 25L, 36
Frequencies: Ground & Tower
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.