Pitch

[Levet]

Make sure you don’t have Rev. checked on as this will change the axes. In the demonstration below my device is pitched forward but by clicking on “rev” the axes changes to the opposite of pitching forward to backward.

Pitch forward with Rev. checked on-

---

Pitch forward same position with Rev. Unchecked-

---

This may be your issue. Also, some aircraft require a bit of positive trim.

---

Understanding Trim

Hey all, welcome to this tutorial which I will be explaining the functions for trim! Mostly to help those pilots who are confused with this system. So here we are: Understanding (Elevator) Trim What is Trim? “Elevator Trim” is a certain system in aircraft that gives assitance to pilots during climb, descent & cruising. Its purpose is to replace the force/pressure off the primary controls, making the job easier for pilots to maintain a stable altitude. Where is it located on the Simulator T…

---

Pilot tutorial guide

Introduction Intro to flight part 1 Intro to flight part 2 Navigating Infinite Flight Weather METAR part 1 METAR part 2 METAR part 3 METAR part 4 METAR part 5 METAR part 6 METAR part 7 Instrumentation Reading the HUD Reading the HUD with pan tilt Flight controls Elevator trim Communication Understanding Unicom In Flight ATC communication Checking in Flight rules Cruise altitudes Holding short Right of way Airport markings …