Pilotcorn09's ATC Tracking Thread [CLOSED]

Hello everyone, this is my ATC tracking thread. I will mostly be doing ATC in Australia or America. I will be ATC 2 times a week or more. Feedback is appreciated.

Currents Status:
CLOSED

1 Like

Take Bad Feedback as a learining lesson that you improve off don’t ignore it just welcome it and learn from it

1 Like

I am open at YBTL, come down and fly!
Will be open for 30 minutes

Aircraft Allowed:

Aircraft

All Militray Aircraft
A318/19/20/21
A330
B717
B737 family
B767
Bombardier Family
Any GA aircraft
Embrear Family

Small GA aircraft takeoff runway 07
Every other aircraft is using runway 01
Pattern work allowed
Open on Training Server

2 Likes

I am open at YBTL Again, come down and fly!
Will be open for 30 minutes

Aircraft Allowed:

Aircraft

All Militray Aircraft
A318/19/20/21
A330
B717
B737 family
B767
Bombardier Family
Any GA aircraft
Embrear Family

Small GA aircraft takeoff runway 07
Every other aircraft is using runway 01
Pattern work allowed
Open on Training Server

I am open at YCFS, come down and fly!
Will be open for 30 minutes to 1 hour.

Aircraft Allowed

Dash 8 q400
Boeing 737-800 (Qantas livery allowed, but very rare for it to go there)
A320/19 (Tiger Air)
TBM 930
Cirrus SR22
Cessna 172
Cessna 208 caravan

Takeoff runway is 03
Pattern work allowed
Open on Training Server.

Closed now due to no one turning up.

Open at KPIT for 30 minutes

Takeoff Runways: 28R, 14, 28C, 28L
Pattern work allowed, Only GA though
Open on Training Server

1 Like

KPIT is now closed. Thanks to everyone who came.

@Aviator_Airbus When you landed, Stay on tower frequency until you cross the hold short line, after crossing hold short line, you then contact ground. Thanks for coming out. :)

1 Like

Yeah, sorry about that. My sensitivity is really whack today, I was drifting all down the runway, lmao.

1 Like

I am open at KCOS after no ATC for along time.

Takeoff/landing runways 35R, 31, 35L
Pattern work allowed
Open on Training server

KCOS ATC is now closed.

Hi!
My feedback;
After clearance for take off, remaining in pattern, you already give me pattern instruction, so you don’t need to tell me again.
Croatia 1, rnw 35L, cleared for take off, MAKE LEFT TRAFFIC
Without new pattern instruction if you want me to stay on same rnw.
Only sequncing, and clearance for option.
Croatia 1, rnw 35L, nbr 1, cleared for option.

When I ask rnw change, I get pattern instruction for same rnw. When I ask again, I get only clearance for lending.
Croatia 1 request rnw change
Croatia 1, enter left downwind rnw 35R, nbr 2, traffic to follow is final
Croatia 1, nbr 2, rnw 35R, cleared for option, after the option make right traffic
… or just nbr 1 if there is nobody to follow.

Hope this helps
Croatia 1

1 Like

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.