Hello today actually right now I’m doing a flight on expert and from past group flights we always use to descend at 120NM will it work for a A330
If it does can you give me a plan please
It’s not about the aircraft. What’s your cruising altitude?
Usually I descend 140-160nm at 1800vs. It’s up to you. Also depending on the altitude of the airport.
I’m sure there are several topics going to be posted below relating to your issue :)
32 thousand
There’s not topics that I can find and what’s a good descend rate plus at what NM
What’s your destination’s altitude above sea level?
How do I find that out
Click on your destination and on the “info” tab it’ll show “XXXX ft”
Three hundred twenty five feet
120 nm is fine. As you’re going down, you should be at around 18,000 feet 60 nautical miles away, and 10,000 feet 35 nautical miles away. You should be constantly adjusting your VS to make sure you hit those.
What is a good VS
Start off at -1600. If you’re going down too fast, bring it to something higher. If you aren’t going down fast enough, lower the VS.
Ok thanks for the help
Now to log out, just need that question, so I won’t be able to reply anymore
If you search for when to Descent then there are loads of topics which gives you some good details such as this one
Great vid linked in there to “Captain Joe” who gives a very good explanation on how it’s done.
Happy landings
If you use a 3 degree descent, you need 3*flight level. Ususally I descend about 30nm before that.
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.