What scale was that ATR? This C130 is 1:200
1 Like
RIP TPA-EYW on Silver..
1 Like
While the Coulson C130 is one of the larger LATs flying around, it’s still small compared to the 10 Tanker DC10 VLAT
6 Likes
1:200. Got unlucky, it was in the box and no returns bc it was from the Airplane Store.
Yea, fr. Flew this one before. Respect to Breeze tho for picking it up.
1 Like
I’ve had a Q400 show up with one of its props detached. It was a pretty easy fix tbh
1 Like
If you still have the blade, get yourself a hobby hand drill, a metal pin, superglue, and a wire cutter. Open two holes, one on the blade and the other at the base where it should go, make sure to drill them centred. Once you’ve done that, grab the superglue and glue the cut metal pin into either hole. Fit the prop and you’re done. I’ve done it several times, and things look very well and blend nicely.
2 Likes
Aviation Megastore NL.
1 Like
Just want to share my 1:400 various airline collection from Gemini Jets, NG Models, Phoenix and YY model!
8 Likes
That is a quite impressive display. Is it a specific airport, or just a layout to increase realism?
1 Like
Thanks Capt! Just a layout to Increase the realism haha still a WIP 
Nice collection!! Where did you happen to acquire your PAL fleet? I found it difficult in acquiring them in local stores here in the Philippines 
1 Like
Where did u get the Backfire template from?
1 Like
LMA, as usual
Hm, didn’t know they had that. Nice models tho!
1 Like
Overcoming my laziness and other stuff, I started another model, an RAF captured Fw 190A-3.
In 1942, Armin Faber, member of JG 2 “Richthofen,” got lost after a Channel skirmish and landed by mistake at RAF Pembrey, Wales, UK. The pilot was taken prisoner and the aircraft tested against the current Spitfire Mk.V. The result? The Spitfire Mk.IX was born, cutting short German supremacy over the Channel Front.
Faber’s 190 was repainted in RAF colours of Dark Earth/Dark Green/Trainer Yellow.
This is the Hasegawa Fw 190A-3 in 1/48, whose moulds look to be a bit degraded because the little amount of flash I encountered in some parts. Decals will come from Xtradecals sheets for everything.
6 Likes
Thanks Capt! You just really need to find a right seller/reseller hahaha
1 Like
Your wallet is crying right now
1 Like
Ironically it only takes me less than 4 hours of work to afford one of those models. I often work 60 hours per week as well 
6 Likes
Is that a flex 
1 Like