Hello again community! Today I’m bringing you another tutorial. In this tutorial I will cover how to make a flight plan with skyvector and use it in your Infinite Flight Flight Plan. This will take your flight simming experience to an all new level or realism!
To begin, go to SkyVector.com. This is a flight planning website that allows you to see airports, waypoints, VORs, TFRs, AIRMETs, SIGMETs, Airways, etc. Once you’re on the website, make sure the map is in “World Hi” (can be found in the top right corner). You’ll be able to veiw Airways, which will be discussed a lot in this tutorial.
Let’s say I want to fly the classic EGLL-KJFK route. In skyvector, i would open up my flight plan (top left). Then I enter my departure and destination (EGLL and KJFK). This will give you the most direct route. However, often times, the most direct route isn’t exactly the most realistic route. So, in order to be realistic, we first go on google and search “EGLL SID”. You may have to do some digging, but you will eventually come across a London Departure Chart. These are essentially what departure waypoints an aircraft needs to take after departing. You can find how to read and insert them into your flight plan here and/or here (this is highly recommended reading). Use your best judgment as to which runway you will be using. Typically at EGLL its 27L/R. For this tutorial I’ll use 27L. I also know that I’ll be departing northish. Based on that knowledge, I’ll choose the “Compton 3 Foxtrot” departure. Inputting the waypoints for CPT 3F, here’s what my flight plan looks like:
Next step in this process is to pick and choose Airways to get you from point A to point B. It’s always smart to use the general of that long magenta line as a guide to whether you should go further north or not. Our departure ends with the VOR CPT. Looking at CPT, we can see that there are several Airways that stem from it. UN14 and UL9 both lead on from CPT. Let’s take UN14.
For those not using this for IF...
Now, if you’re doing this just for fun, it’s a lot less time consuming to enter the beginning waypoint (CPT) and the end waypoint (OKTAD) with the airway name inbetween. That will look something like “CPT UN14 OKTAD”. The system will automatically input the inbetween waypoints so you don’t have to.
If you’re using IF, put the waypoints along the airway into your flight plan (KENET, UGNUS, OKTAD). Now, just keep adding airwys until you reach the edge of Shanwick Oceanic. It should look something like this:
Next, we enter our North Atlantic Track (NAT). This is only if you’re crossing the Atlantic. If you don’t know how to use the track system, check out this tutorial.
After I enter my NAT (I chose Bravo), I’ll enter a few Airways leading to KJFK. After that, look up STARs (arrival charts) for KJFK. Choose an arrival, enter it into your plan, and you’re done! Here’s the end result of mine:
Here’s some important things you should know:
Infinite Flight does not have every waypoint that skyvector does. If you have a missing waypoint in your flightplan, head to http://fpltoif.com/ > Menu > Waypoint Lookup. This will give you the GPS coordinates of the missing waypoint.
If it’s not in fpltoif, go to skyvector and lookup the waypoint there. If you need help, feel free to ask!
Unsure what SID/STAR to use? Use the website mentioned twice already to help you out (I swear, this isn’t an advertisement).
The difference between “World Hi” and “World Lo”
I sincerely hope after reading this that you take this knowledge into account when creating your flight plans. Questions and comments are welcomed! Thanks for reading!