Whenever on multiplayer or flying a350 0r a320 series the game lags and glitches. when ever im around other planes this also happens. why is this happening??
Hi! You can find the solution to this in the FAQs, read this!
What to do if you experience lag on your device
General tips regardless of device:
- Turn Limit Frame Rate ON (box should be ticked) if you notice that your device tends to heat up or if you are experiencing lag. A device that heats up too much is more likely to suffer performance degradation which could lead to lag and app crashes.
- Infinite Flight doesn’t take up a specific amount of storage, it can change depending on the area you’re flying in etc. We therefore recommend that you always have at least 1GB of storage available on your device.
- Before longer flights, it is advised to reboot your device and close any apps running in the background to enhance your experience.
- It is possible to fly and charge the device at the same time. The key to this is to use less power than being charged. One way to accomplish this is lower your screen brightness and ensure Infinite Flight’s low power mode is enabled.
- Disable active ad or message blocking apps
- Don’t modify, “Root”, or “Jailbreak” your device
- Use a strong WiFi network within a relatively close proximity to your device
- Lower Infinite Flight graphics and performance settings
- Lower the Rendering Resolution setting.
- Disable Anti-Aliasing.
- Lower the Rendering Quality setting.
- Lower the Texture Quality setting.
- Lower Airplane count.
At any point if you’re experiencing decreased performance, “Limit frame rate” should always be ticked. This setting can have a great negative impact on performance unless your device is considered high performance.
General iOS tips:
- One great thing to do before launching Infinite Flight, is to perform a soft restart of the device. This is a quick and reliable way of making sure your device is operating at peak efficiency. This is done by holding down the power/lock button until you see “Slide to power off”. Then hold down the home button until you’re returned to the home screen. For iOS devices without a Home button, a restart is recommended as the soft restart feature does not exist on those.
- Make sure you don’t have “Low power mode” on your iPhone. If you have, the battery icon in the top right corner is yellow. This can be deactivated from Settings -> Battery, or from “Control Center” depending on how you have it set up. Having “Low power mode” enabled while using Infinite Flight could result in a performance degradation.
Note : This is not the same as “Low power mode” in Infinite Flight. This is a device function.
General Android tips:
- Make sure you have Android Battery Saver disabled. Having this enabled can cause a lot of degradation in terms of both storage, performance and network.
- Newer Android devices may work fine with Anti-Aliasing on. Turning this off can help performance for older/less powerful Android models.
- Some devices (ie Samsung) may have a Game Tuner app to enhance the performance of games. While some users have not seen an issue there is a number who have. It is best to run IF by itself instead of through a game tuner.
If none of the suggestions above helps:
As a final resort, reset the device to factory settings. Be sure to back up all important data on your device first.
If you need anything else, feel free to let me know. I hope this solves your problem.
Try doing whatever is stated above as it helps a lot. However, whenever flying in busy airspace especially during takeoff and landings, lags tend to happen. If abke try to avoid flying into extremely crowded airspaces and you should be fine :)
I’m noticing my device is super hot! Too hot to the touch even with the limited frames rate on! I wonder why?
What are your game and device settings?
All high! But it’s been that way always, recently it just started to do this! I put the limited frame rate on and it still gets hot!
iPad Pro 10.5
Device Compatibility Thread (19.4) - Built By Us For You!
Could this maybe help?