LNAV, flight path handling problems on DME arcs and curved intercept paths

Version Information

26.5 (20148)

Device Information

Samsung M55, Android 16

Description

As title, LNAV handling is a bit of a mess.

  1. Entering the arc with a fix between the inbound leg and arc (TF-AF) leads to the LNAV overflying the fix and overshooting the arc. This seems to be a holdover from curved paths (RF) on RNP procedures. Segment to “fly and intercept” the arc without a fix (CI) don’t have this issue.

  2. Segments with curved intercept paths, e.g. arc to track (AF-TF), fix to course (TF-CF), fix after direct (DF-TF) are very prone to undershooting or overshooting. If followed by segments with a track or specified course, LNAV rarely manages to correctly follow it after intercept, devolving to “fly directly to fix” instead or overshooting the next segment trying to correct.

  3. Procedures with a “intercept and fly on heading/radial to fix” segments (CF) devolve to “fly directly to fix” when no intercept heading is specified, same fashion as 2.

Screenshots

2 Likes

Which airport and procedure is this

1 Like

I believe it’s Osaka Itami

Totally agree with this, sometimes my autopilot likes to make a 360 rather than a right or left turn sometimes. Plus I also have difficulty keeping the plane in the flight plan and gotta override it sometimes since it deviates quite a bit during turns

1 Like

On curved SIDs, there is still a nasty bug particularly after the first turn as the aircraft does not turn smoothly onto the new heading but snakes left and right before straightening.