Nah, I’ve got the weight right where I want it, jus usually happens after letting the AP go
What’s your configuration when you disengage. Flaps, spoilers, speed, trim, weight, ect
I’m usually at 10k, starting my approach n2 whatever airport I’m using, I’ve never used the trim, I read n some thread it was basically useless. , weights around 55% IF I’m not mistaken
N I don’t start using flaps till about 3k.
Speed and flaps? Spoilers in flight or armed? What attitiude does the plane take when disengaging.
It’s not useless for disengaging AP. That’s your problem. Also disengaging AP at 10,000 and having a sudden drop should not automatically end up in a speed violation. that would only happen if you were going over the 250kts at 10,000 then disengaged and did not slow down. Sounds like you did not use trim to prevent the pressure the AP had on the yoke to maintain level flight (you cant see the affects of Trim in AP only after you’ve disengaged AP). In addition, sounds like you forgot to Calibrate.Finally, you should not be disengaging AP until you are on the localizer and well below the 250kts limit.
Also you should not calculate when to use flaps with altitude but always with Vref+X speed. Just some things to help you on your next flight.
Speed, between 330-350. I do use the flight flaps occasionally, depending on how far out I am. The plane basically starts rolling and pitching, can’t maintain a level angle of attack. It’s all over the place
There’s your problem and the reason for your violation.
That’s why I very seldom use the ap. Sounds like u know more about it than I do, I’m just tryin to get from a to b. Fly a good route and nail the landing.
Not over 10k it’s not. 350 is the limit at or above 10k. I know to get below 250 b4 going under 10k.
Ok well your far too fast. Trying to stay right above 10,000 to not receive a violation. Try 230kts flaps 5 and 10-15% positive trim.
Thx for all you’re help, I’ll just wait it out/.c what happens, ain’t using the AP ne more though.
One correction the Vref speed for flaps 5 at 55% weight should not be that high of a speed.
I would highly suggest that. Get a feel for the aircraft before using AP. It’s been known to bite RL pilots.
Good call just trying to remember off of memory.
No problem. I was worried that next time he’d fly he would set flaps at 5 at that speed and tear of his flaps lol.
The limit above 10k is based on the physics of the aircraft. If you are going to fast it will fall out of the sky!
I used to have that problem all the time, solved it by setting the speed to 305 once above 10k, once above 28k this relates to M0.81 and a ground speed of about 450kts.
For disengaging the AP I tend to do this in stages. At about 2k I take out the HD and ALT settings to hand fly the aircraft, at about 1k I then take out the ‘auto throttle’ ( speed).
I find that if I use the AP button to disengage , even just the SP setting, then the nose drops down even if I calibrate just before I do so!
Good luck and happy landings!
The limit above 10k is based on the physics of the aircraft. If you are going to fast it will fall out of the sky!
I used to have that problem all the time, solved it by setting the speed to 305 once above 10k, once above 28k this relates to M0.81 and a ground speed of about 450kts.
For disengaging the AP I tend to do this in stages. At about 2k I take out the HD and ALT settings to hand fly the aircraft, at about 1k I then take out the ‘auto throttle’ ( speed).
I find that if I use the AP button to disengage , even just the SP setting, then the nose drops down even if I calibrate just before I do so!
Good luck and happy landings!
ive read the chart dude. thats why im posing the question. read the post man;)