Landings not counting…?

Hey!

I’ve recently been doing multiple short hops with the A350-900 but on many occasions the landings aren’t counted?

I flew the A350-900 from VOYK to VOMY then to VOBG and finally VOBL but from this entire set only 1 landing was counted. I did this thrice with the result either being 1 landing or 2 landings. The variation in landing numbers is what’s confusing me?

In both instances when I landed in VOMY and VOBG I did actually taxi to the gate and park for a few mins.

Any reason as to why the landings didn’t count…?

VOMY is a regional airport and in real life can only accommodate the ATR and Dash 8.

VOBG is an ex-International Airport now used for Defence, flight testing of HAL manufactured aircraft and VIP traffic. To this day it can still accommodate many wide bodies also.

Hello!

Well, you may have already explained the issue in the post. But my other question to you is, where are you touching down? Is the point at least passed the threshold?

3 Likes

In all cases I landed in the area between the touch down zone markings and aiming point markings which I believe is valid…? Might be wrong.

Could it be because the A350 is too big for VOMY sand VOBG in IFS…?

VOMY and VOBG are small for the a359, but anyways the landings can be counted

2 Likes

Then I would say to send a replay to see where they are touching down. This is really, to my knowledge one of the things that causes this the most.

4 Likes

your connection can also be a cause why your landing not counted, if you lost connection while your landing gear touches down on the runway the server can’t count it as a landing

2 Likes

Thanks… this is probably it. As that day in particular my WiFi was quite a moody device

1 Like

Hi, Any area of that runway still count as landing tho. I did experience that with small XClub Planes. :)

And, I personally was experiencing that. And during flight, putting Landings on Flight Data Configuration, seems to solve the issue too.

1 Like