When I do the mannual landing after calibration the aircraft suddenly move right or left at approach it is happening in some runway and aircraft crash does anyone know what is going around
It’s either your speed or the weight of your aircraft
I don’t think I was flying light from London to roma my aircraft load was 28 and speed 130 to 135 ground speed
Ground speed doesnt matter on approach what matters is air speed
Everything was ok i don’t know what actually happened
Crosswind maybe? Turbulence? Low airspeed? What aircraft was this?
Do you have a screen shot? As @BenjiTheBull mentioned, you can have what looks like an ok ground speed but if you have enough tailwind the actual airspeed can be below the flying speed of the aircraft. Your controls were working ok up until loss of control?
1 Like
777 300er it is happening in some runway few days ago it happens in Paris few days ago now in roma
1 Like
can you share the replay?
1 Like
Unfortunately those two images don’t give quite enough information to determine the exact cause. Do you have another screen shot of the instant of loss of control?
You mentioned groundspeed before, but it looks like that was actually your airspeed (with GS at 140 and 141kts).
Your angle of attack doesn’t look too bad.
The only possible question mark I can think from these two images is your descent rate is a bit accelerated which means as you flatten that out it will bleed off extra airspeed if you don’t add power at the same time.
edit: Also, winds are shown as zero. But I just noticed your FPV (the little circle) shows what appears to be a crosswind to the left. If this is true, without compensating for the crosswind, it can be responsible for moving you sideways.
Is this movement after you touchdown on the runway?:
Or is it while still in the air?
1 Like
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.