Will pop around.
Sorry I’m closed
All good. I might catch ya next time!
Sorry to be a mess and be annoying but I always end and join but this reason was something that the critic group of IFC will come in( this troller was crazy) and I was trying to handle it being professional also I had my brother doing pattern work, but to get to the point
Only using runway 29
I’ll pop around
Why are you using someone else’s tracking thread?
You can make your own, it’s easy :), check this out if needed How To Make ATC Tracking Threads
crab oof I posted on the wrong thread, I found tis other one which I thought I was posting on
If your going to open I’ll be there in a few
yeah im open
Closed now. Last plane arriving
My display was IFATC oliver.
Here is some feedback!
- cross runway. wait till the aircraft landing or taking off has passed the aircraft wanting to cross. You realised just in time, which was great!
- Great sequencing! + clearance
- The go around for VH-UDH, on IF id continue with the go around. SO if he said disregard, make him do the go around, also other pilots may be confused if sequenced to that aircraft. His positioning wasn’t good on short final, so the go around would have been better for the pilot.
- lil confused about the freq change. I just extended downwind so the cessna would have more time to get off the runway.
- Exit command, Good!
Tips for future controlling:
When i control i like to seperate the commercial jets and the GA gets when doing pattern work.
e.g left traffic for commercial jets
right traffic for GA (slower aircraft)
And @Oliver02 sorry about that runway cross then told you to cross again so the story
I was getting ready once the Cessna passed to tell you but I thought that there was one more step saying “expedite traffic on —-“ but it was just expedite
Thought you where leaving because they say once they leave your airspace tell them frequency changed approved
He’s my brother and he was just busy in rl that he acidently started tapping randomly
Catch you next time
Well sometimes it’s a trick and I always have to be prepared
IFATC will not trick you like that. IFATC will always use correct procedure. However can trick you in many other ways… However other pilots may not know, which you should ask the pilot their intentions
Sorry but maybe this time i can fix my mistakes
Dep runways: 28R
Arr runways: 28L
will not be able to chat during session, only have one device to use
Close sorry I’m not ready
No worries! These tracking threads exist so that people can practice their ATC’ing.
You were doing good, I noticed you messed up a bit when I requested the runway change, but you perfectly fixed that later. Make sure to take a second to double check what you’re sending before sending it, no hurry. This will prevent mistakes
(I was AFKLM363)
Maybe for the next