Whenever I taxi and try to turn on the runway it always never turns and it goes into the grass help ?
Do you taxi fast?
Yes but when I have to turn I slow down and I try to turn
Are you using the rudder or the tilt controls to turn the aircraft?
I us the rudder
Do you have the rudder and aileron coupled on ground?
How fast you taxi while turning?
When you get on the runway your groundspeed must be around 10 knots. The aircraft will then fully rotate.
Also, check your weight. That may play into it
Yea I do ???!
I usually put it to normal
Try to turn without out Auto-Coordination. Might play an effect
Ok I’ll see
Omg! I have also been having trouble, sometimes when I touchdown so far from the touchdown zone and I can’t exit the runway to the taxi ways, I’ll have to do a 360° turn which is hard to do I don’t know if the problem is with the front gear because most of the time I go in the grass.
Yep this what this topic is about
Are you talking about landing or take off?
Is there a crosswind?
What is your ground speed when initiating the turn?
If you use rudder when turning, but your aircraft goes onto the grass, you can use your brakes when turning using the rudder. Using the brakes will slow your aircraft down and will make your turning faster if you are using rudder. This also applies to using auto-coordination when turning too. Apply that brake only if you feel you are taxiing too fast.
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.