Flight Controls go haywire

Recently on final approach my flight controls go haywire, where I get massive violations.
Also been running out of fuel quicker than the eye, and I go by flight plan.
Any suggestions?

1 Like

Hi there,

Thank you for contacting support! We are here to help you have the best experience possible and ask that review the information below to better troubleshoot your experienced lag and crashes. Below are some basic steps taken that may help resolve the issue:

  • Keep as much unused internal device memory (RAM) available. 1GB is the recommended amount
  • Android: Change device display resolution
    • Settings > Display > Display size to Large, Larger or Largest.
      • Some devices will offer to change Display Resolution instead, set that to the smallest possible.
    • Ensure Text to Speech (TTS) is enabled
  • Disable active ad or message blocking apps
  • Don’t modify, “Root”, or “Jailbreak” your device
  • Use a strong WiFi network within a relatively close proximity to your device
  • Lower Infinite Flight graphics and performance settings
    • Set Rendering Resolution to Low
    • Set Rendering Quality to Low
    • Disable Anti Aliasing

For in-flight performance issues, please refer to these helpful tips:


If you try everything above and still have trouble, check to make sure you have the latest firmware update available for your device installed. Lastly, we recommend you delete the app, restart device power, then sign into the same account used to purchase the app originally to reinstall.


For further assistance please respond with detailed information about your device, operating system, scenarios to reproduce the lag, and any applicable screenshot. Kind Regards.

1 Like

Go to settings > controls > reset default. See if that works! 267FFEE2-1C50-4CAE-98F0-C58C754BCB15

D501BFDF-6521-4785-BD66-A0DDFA4AB792

ED514997-75EF-4AB8-B494-E2609691FB0D

Was your phone plugged in during this time? Often if you have a bad cord your phone goes all wonky on you whenever you tap something. Interesting that this was the solution to someone else problem yesterday! Its worth a shot! Thanks for contacting support!