Culifornio's ATC Tracking Thread [Come and Enjoy ]

Welcome to my Topic of Tracking Thread, another one yes :) Would like to share my controlling areas when I’m connected as ATC and pilots can help me to upgrade my experience and improve always doing my best. Any suggestion or ideas will be welcome for sure!

My way to work will be simple, I will post every time that I’m connected and when I was connected. Will be gratefully if everyone follow ATIS rules that im gonna write and respect orders, for sure I accept suggestions of runways and taxiways. Thanks to everyone.

------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------
Sponsored by

12/02/2019

Air Traffic Control at EHAM

AVAILABLE ATIS
// Land by RWY 27 - 24 - 22
// Departures by RWY 27 - 24 - 22
// Approach below 180-160 knots
// >10000’ below 240 knots
// <10000’ as flight rules
// Estimated time of Controlling - 45 min (Depending of Traffic-

SERVER - Training Server [Global] V2

6 Likes

I will start everything at Server 2 to know how is going with pilots and everything, if everything looks fine, I’ll work to arrive to Expert Server and support big pilots :)

12/02/2019. CLOSED

Air Traffic Control at EHAM

AVAILABLE ATIS

This text will be hidden

// Land by RWY 27 - 24 - 22
// Departures by RWY 27 - 24 - 22
// Approach below 180-160 knots
// >10000’ below 240 knots
// <10000’ as flight rules
// Estimated time of Controlling - 45 min (Depending of Traffic)

Pattern EHAM

This text will be hidden

Decided to give in pdf like this everyone can read and I will not make the post so big.

SERVER - Training Server [Global] V2

No pattern work??

To control on the Expert server, you must be a certified IFATC member. You can look into the recruitment process (when you’re ready) here:


On a side note, I’ll stop by for a few patterns :)

As I said, I’ll work to arrive there :) I know that I need to have X operations and level. Thanks

1 Like

I’ll work on it for next time, I will write well all well like this everyone will understand :)

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.