Cant't approach and land with new update

[sabine]

I cant get my glideslope and localizer to work with the airport and runway I am approaching.
With my almost 7000 HRS of flight time I got in IF with this update I feel like a new member.
Can anyone be so kind to help me on this topic???

[Mattheus]

It’s simple, just hop into #tutorials and read some of the new ones that have been released for the update.

[Chris_Hoss]

ILS approach A350

The 19.4 release introduced new UI controls with enhanced navigation features. APPR works the same but may require some additional setup prior to using. Please reference this tutorial on the new UI and APPR features.

[Alphadog4646]

There’s a tutorial by Trio, on how to activate APPR. It’s more “Complex” but makes the experience more realistic.

How to activate APPR

Here is a step by step check list to use to activate auto-approach (APPR). It’s a much more detailed and realistic procedure now, in comparison to the past iteration. The only type of approach you can use auto-approach for is an ILS approach. Once you are within 27nm of your destination, you will need to do the following to tune to the ILS frequency to gain the ability to activate auto-approach. Click the airport to show more information Go to runways Click the runway that you’d like to land …

And learning this can’t hurt either:)

Avionics Control Panel Explained

[image] [image] Overview Letter Instrument Explained A NAV 1 Displays the VOR Identifier and VOR frequency for tuned in for Nav 1 B NAV 2 Displays the VOR Identifier and VOR frequency for tuned in for Nav 2 C ADF 1 Displays the ADF Identifier and ADF Frequency D CRS 1 Allows you to change the course needle for the navigation frequency dialed in on NAV 1 E CRS 2 Allows you to change the course needle for the navigation frequency dialed in on NAV 2 F SOURCE Change between GPS, …

[sabine]

Thanks so much for taking the time to answer my concern guys!!

[Chris_Hoss]

If you have any more questions let us know in the thread

[sabine]

Sure i will . Thanks again!!!