Device:iPhone 13
Operating system:iOS 17
![IMG_2028|820x378]
Hello.
I would like issues with Boeing instruments and PFDs.
1: over speed red line should be in stripes( same goes for HUD)
2: the font seems to be incorrect, compare the IF 175 to the IRL 175, they don’t look the same. The diagonal line on the “7” should be straight and the text seems to be bold, the closest font I can find to the displays is the futura font.
Not sure if all the other Boeing instruments use the same font but it seems like it.
3: the corners seem to be more round IRL.
4: there are missing navigation info above the top left corner of the blue/orange area of the PFD
5: there seems to be a color discrepancy between the vertical speed indicator and the altitude and speed indicator
6: I’m not sure if this differs based off autopilot, but the top area of the PFD should state FMC speed, LNAV and VNAV PTH.
7: the pink text/glideslope diamond is too dark, the closest color I can find for them is (Hex:f891fc)
8: the black “L” shaped icons that indicate the AOA, the white outline on them should be thicker
9: there is a missing stall speed indicator (Same goes for the HUD view and Airbus aircraft)
10: there are missing IAS and GS speeds
11: the CMD seems to be missing once autopilot is activated
12: the pink icon of the altitude indicator (basically what you entered into the autopilot) seems to cover a lot less of the altitude indicator than it usually does, so basically it is a bit to the left than it is IRL.
13: the colors of the blue and orange are a bit lighter than they are IRL. The closest hex color I can find for the orange is 934515 and the closest hex color I can for the blue is 0888c1
There are all the errors/issues I can find within Boeing instruments (excluding modern instruments)
Here’s an image of our PFD and IRL PFD
I couldn’t find any topics like this, hope this helps!
