Hi I have a problem everytime I try to land at LaGarbagia my Airbus 737 stalls out when I’m in the pattern then crashes into the airport
What speed where you at?
Correction: Boeing 737
How low is your speed?
210 on right downwind
So you purposely stalled into the airport?
If you stalled at that speed, I would think you were too heavy and didn’t use your flaps. By the way, why purposefully? 🤨
I don’t think he’s being serious here in the first place
Are you 100% sure it was a stall?
Yes the little stall GUI popped up on the top
What was your weight? Edit- were u using any flaps?
10 flaps, 10,000 lbs gas.
Let’s stay on topic. We are trying to help you here (:
Okay, well during landing, you should be at full flaps. And with full flaps, you will need to be at around 145-150 on your speed. You should also make sure that during your landing that your landing is below the Max landing weight. It should not show any color. It should only be white and not yellow. Yellow is over the max landing rate and below the max takeoff weight.
You shouldn’t be at full flaps on downwind
Did you calibrate?
yep
i always calibrate 50 nm out.
You should calibrate a lot more than that. I calibrate right before I turn off the Autopilot at about 9 nm out. If you can’t produce enough lift, use the trim.
Next time use trim, more flaps and a fuel planner presumably https://fpltoif.com
:)
This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.