Autobrake feedback

Also worth noting, auto brake disengagement IRL is tied to the brake pedals. The moment any manual brake pressure is applied auto brakes will kick off. If accidental brake application is an occurrence, I’d suggest when you put your finger on the brakes to drag your finger slightly up and off the slider. Your finger does not need to be directly over the rudder slider for the rudder to work, effectively allowing you to not interfere with the brakes until you pull your finger closer to the edge of the screen.


Like Drummer said, in the HUD there is an annunciation that says “Autobrakes”. Irl, some aircraft have an audible annunciation that says “ Autobrakes”. Some will simply have the aircraft deceleration and that’s your indicator or some on the MFD.


Kind of building on with what Jason mentioned, while MAX or HI braking would break things on some aircraft, HI braking is possible on other aircraft IRL. Because the way that Autobrakes were coded, you cannot set MAX brakes in the air. It simply won’t let you.

But if your landing in an aircraft where you know they land with MAX on occasion (EJets), you can keep the MISC - Autobrakes tab open on landing. When you touch down, then enable MAX and you’ll effectively get that MAX/HI braking that you so desired in the air.

It can be a slight inconvenience, but I’ve tested it and it does work pretty well. Worth giving it a shot as a work around.

4 Likes