ATC - Pass Traffic / Traffic Advisories

Hello IFC! This one is for my ATC oriented people.

One of the things that we do most often in Air Traffic Control is something called “passing traffic” (at least in Canada this is what we call it). If you fly in real life, on another flight simulator network, or listen to LiveATC.net, you have probably heard something like this before:

“Tindi 202, traffic 12 o’clock, 1-0 miles, opposite direction Twin Otter 1,000 feet above”

Traffic advisories are used by almost every type of Air Traffic Controller (Towers, Terminals, and Centers to name a few), they are passed between VFR - VFR, IFR - VFR or IFR - IFR traffic typically when the minimum separation exists (usually when an aircraft is withing 5 miles (or 3 if a sector is working 3nm separation) and 1,000 feet of separation for IFR aircraft or when the controller deems it necessary.

On Infinite Flight, our only option in IFATC is to issue a ‘traffic alert’ which tells a pilot simply to “check surroundings immediately”, a transmission which could be avoided altogether if a pilot were able to “report traffic in sight” and maintain visual separation if required. This is a tool that I believe could be especially useful in the Tower position which handles the largest mix of VFR-IFR traffic, and doesn’t have any options to vector traffic, only issue pattern instructions and when backed into a corner, issue a full 360* turn.

How do I see this being implemented?

Implementation would not require many UI changes the way I imagine it. We already have the Point and Vector tool, and this could be one more function of the same tool. Simply drag from one aircraft to another aircraft. When the drop down appears, click “Pass Traffic” and Infinite Flight send an auto-populated advisory “Infinite Flight 1, traffic 2 o’clock, 6 miles, westbound Airbus A321 at FL320, report traffic in sight”.

The pilot would then get two (or three*) options:

  • Traffic in sight
  • Looking for the traffic
  • Traffic not in sight*

*I would think that reporting “traffic not in sight” should come after stating “Looking for the traffic” however, this could be weather/visibility dependent if the pilot assesses they cannot see the traffic immediately due to visibility constraints.

If you are interested in brining a tool used daily for separation by both controllers and pilots to Infinite Flight, leave your vote above or a comment below to bump this feature request!

Blue skies,
Gabe

6 Likes

Voted for this. I find this essential for traffic separation! Would love to see this in the game sometime.

2 Likes

This would be a great feature, voted!

1 Like

Voted. Very good idea

1 Like

Voted! This would be a great feature to have on hand!

1 Like

Thanks all! I think 8 votes is the most I’ve ever received :joy::joy:

In all seriousness I’m humbled you all think it’s a good idea, thank you

1 Like

Agreed. Especially for the local command like “[callsign] maintain visual separation with [callsign]”. Even actually we can look at the minimap; that’s fine and would be helpful for radar separation as well.

1 Like

Bump. I’d Love to see this implemented

2 Likes

Ayy trainer bump let’s gooo