APPR Issues

Auto landing does not work write i alline the aircraft up and turn on the auto landing and it turns and misses the runway and crashes any support ?

1 Like

What is your speed? Which aircraft? Which device? Which version? That may be the problem!

1 Like

Speed was 180

1 Like

Did you lock the ILS?

1 Like

(Added a few things)

1 Like

180 too fast.

2 Likes

Depends which aircraft. For a 747 or A380, it’s fine.

1 Like

With Flaps 2/15 maybe but not with F/30

1 Like

What is the aircraft, it’s load, flap setting, speed, set to? Winds and direction?
GPS or ILS locked correctly?
180 is a bit fast for final approach. Should be more like 135- 160 knots depending on aircraft, load, alt of airport, winds temp etc.

11 Likes

@Henrik might have broken it.

11 Likes

What airport?

1 Like

You need to check your ILS or GPS is on the correct runway.

1 Like

Oh oh oh, 180kts?? It’s too fast for every plane! You must be at about 130/160kts depending on the Aircraft.
Also, some weekend ago I had your problem and how did I solve it?
Easy, never use the AUTO LAND, because it isn’t funny look your plane Landing, it’s really better land with your hands! Try ;)

2 Likes

Remember. When using the APPR, you never change anything once your 5 NM away from the runway. If you need to make changes, make a go around.

2 Likes

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.