AirSerene's ATC Tracking Thread - [CLOSED] @ N/A

Hello welcome to my tracking thread I have created a tracking thread to improve my controlling skills and hopefully join IFATC.

Any feedback would also be very helpful.

EGNT OPEN landing and take off runway
07 NOW CLOSED.

OPEN EIDW
Landing runway and departing runway 16 and 10
Patternwork allowed
NOW CLOSED

Thanks for changing editing the title yesterday @MrMrMan

2 Likes

KHTO OPEN
Using runway 28 and 34
Perfect airport for using GA aircrafts
NOW CLOSED

1 Like

KHTO OPEN
using runway 28 and 34
Patternwork allowed
NOW CLOSED

Good, job but two things

1.) when I requested a runway change you must always give a pattern instruction and sequencing if needed followed by the clearance for the option and a new left or right traffic pattern

2.)I got the exit runway command when I was still in the air. Just make sure that you are looking at the arrow next to my callsign on the radar screen to see if I’m still descending or ascending.

Thank for controlling and good luck 👍👍!!!

1 Like

Thank you for the feedback.

1 Like

EGNT OPEN
Landing and departing runway 25
Pattern work allowed
NOW CLOSED

EIDW OPEN
landing and departing runway 28 and 34
Pattern work allowed
CLOSED

KSEA OPEN
Landing and departing runway 16R 16C and 16L
Pattern work allowed

@lurker sorry I should have said cleared for the option instead of landing but thank you for participating i only realised my mistake when you existed the runway.

Hi, N561JV in the TBM.

  1. You did not need to tell me “enter left downwind 16L” when I was already told to make left traffic.
  2. You should have just said “n561jv, cleared for the option.” when I was turning downwind. If I am in the pattern you should clear me for the option not to land.
  3. Give runway exit once I was slowed down <70 kts.

Great job on my second flight!

1 Like

When you requested the runway change was all the comands I sent you correct ?

Yes. Even the direction to make left traffic with the clearance for the option on 16C. Good job. Too bad there wasn’t another plane or two to do sequencing.

Thank you for giving your free time to help me.

KSEA is now closed

LEMG OPEN
Landing and departing runway 12 and 13
Pattern work allowed
CLOSED

LEMG OPEN
Pattern work allowed
Landing and departing runway 12 and 13
CLOSED

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.